Product Details:
Payment & Shipping Terms:
|
Type: | Manual Telescopic Mast | Color: | Branze |
---|---|---|---|
LED Light: | 100w Each | Height: | Can Customize 3-18m |
Operation Mode: | Hand Cranking | Linear Way: | Outset |
Interface: | 150 Flange Interface | Material: | Aluminium Alloy |
Highlight: | portable telescoping antenna mast,pneumatic telescopic mast,Aluminium Alloy Telescopic Antenna Mast |
3-18M Customize Manual Telescopic Antenna Mast With 6 100W LED Light
Product description:
1. Manual telescopic mast, height can be customized 3 ≤ 18 meters.
2. The manual telescopic mast is made of high strength aluminum alloy, which has the advantages of corrosion resistance, light weight, high bearing capacity, low noise, fast lifting, low impact resistance, good stability and so on.
3. It can quickly, reliably and safely raise the communication antenna, lighting, lightning protection, optical transmission and imaging equipment to a predetermined height.
4. The working wind speed reaches Level 8/19m/SEC.
5. Automatic start, one-click in place function, when the power connection is wrong, has the protection function.
Manual telescopic mast installation instructions:
1. Vertical fixed installation: it can be installed on the ground or on the vehicle.
No matter where it is installed, it must be made sure it is perpendicular to the ground.
If the manual telescopic mast is tilted, the lifting effect of the manual telescopic mast will be affected.
Manual telescopic mast is seriously tilted or tilted for a long time, which will cause damage and danger to manual telescopic mast.
2. Guy wire fixed: manual telescopic mast needs to be installed in a fixed object, and could not shake, such as walls, car body, foundation piles and so on. The fixed points should be two points at least, one of them in the manual telescopic mast, the distance between the two points is greater than 2/3 height of the manual telescopic mast. The connection should be firm and reliable.
3. Ground fixation: tripod can be used to fix the telescopic mast on the ground. Select according to customer requirement.We have two types of tripods to choose from. Application site: 1. Inside car installation 2. Outdoor for car installation 3. On ground with tripod installation.
Manual telescopic mast operation instruction:
1. Insert the hand crank, turn it in clockwise to rise, and stop rising when a red mark show.
2. Turn it in counterclockwise, the mast descends under loading. (If the load capacity is less than 5KG, you could pull down the guy wire of the upper section while turn it in counterclockwise to descend the mast.)
Precautions:
1.It is not allowed to use without guy wires.
2.In the process of descending, if any steel wire rope is found loose, it should stop descending. Please rise the mast in clockwise to tighten the rope, and then descend the mast.
Environmental adaptability | |
Items | Test condition |
Telescopic mast | |
Anti-wind capability | Level 8 wind: work normally; level 12 wind: can not be destroyed (working condition, nailed into the ground, 3-4 guy wires, pull angle: 30-40 degrees, the guy wire is tight).GJB74A-1998 3.13.13 |
Height | Can customize 3-18m |
Operation mode | Hand cranking |
LED light | 100w each |
Linear way | outset |
Bearing weight | According to the height of lifting rod and installation items to determine |
Interface | 150 flange interface |
Material | aluminium alloy |
Color | bronze |
Humidity | less than 90%(temperature 25°) |
Maintainability | Wearing parts easy to disassemble; components can be repaired and maintained by tools; general maintenance and repair time≤30min |
Security | Self-locking at any height; would not fall at any time |
Tripod | Can choose |
Effect | Fixed telescopic mast |
Size | According to the height of the telescopic mast to determine. |
Contact Person: Miss. Anne
Tel: 86-19926558890
Fax: 86-755-29680362