|
Product Details:
Payment & Shipping Terms:
|
| Material: | Aluminium Alloy | Control Way: | Manual / Electric Power |
|---|---|---|---|
| Voltage/Current:: | DC12V/30A | Low Temperature Storage: | -55 Degree |
| Work In Low Temperature: | -40 Degree | High Temperature Work: | 55 Degree |
| Work Height: | 3.5M ( 3m-20m Can Be Customized) | Closure Height: | 1.2M |
| High Light: | portable telescoping antenna mast,pneumatic telescopic mast,LED Light Telescoping Antenna Pole Mast |
||
OKAF Electric Mast Pole Aluminium Alloy LED Light Telescopic Mast Floodlight from 3.5M to 18M Made in China
The product description:
1. Lifting rod is the carrier of high equipment, suitable for vehicle, ship or land.
2. It can quickly, reliably and safely raise communication antenna, lighting, lightning protection, light transmission and camera equipment to a predetermined height.Upon completion of the work, the same equipment can be rapidly, reliably and safely lowered to a predetermined height.
3. The company's manual lifting rod products are made of high-strength aluminum alloy, corrosion resistance, light weight, large load, small noise, fast lifting, small earthquake resistance, stable and other advantages.
4. In addition, our products are also widely used in golf, large football field night lighting, etc
The working principle of:
This system USES the electric push rod principle, through the RS485 and the wireless control lifting rod lifting, the self-locking performance is good, can realize the reliable self-locking in any position, has enhanced the safe reliability.
Environmental adaptability:
Specification:
| Project | Test conditions |
| The wind resistance | 8 wind working normally 12 wind does not destroy).3.13.13 GJB74A - 1998 |
| Low temperature storage | -55° |
| Work in low temperature | -40° |
| High temperature storage | 70 degrees |
| High temperature work | 55 degrees |
| Wet degree | Less than 90% (25 ° temperature) |
| Drench the rain | The duration of 6mm/min was 1h |
| Corrosion protection | Refer to gjb150.11a-2009 standard test |
| Sand dust | Refer to GJB150.12.1986 standard test |
| The sun's radiation | Refer to GJB150.7.1986 standard test |
| mold | With reference to GJB150.2.1986 chapter ii standard, grade 1 of long mildew was tested |
Detailed parameters
| Way of working | Electric and manual |
| Extension height | 3.5 meters |
| Closing height | 1.4 meters |
| Section number | 4 |
| Horizontal and vertical rotation speed | 6r/min |
| The wind resistance | 66Km/h |
| The control mode | RS485, Pelco-D/P protocol, wireless remote control and manual control |
| Material | Aluminium alloy shell |
| security | Any height self - locking off phenomenon |
| System operating voltage | Dc12v-15a (customizable DC24V/AC220V) |
Contact Person: Miss. Anne
Tel: 86-19926558890
Fax: 86-755-29680362
| Factory Address:3rd Floor, No. 13, Huiye Road, Tangjia Community, Fenghuang Street, Guangming District, Shenzhen，Guangdong, China | |
| Sales office:3rd Floor, No. 13, Huiye Road, Tangjia Community, Fenghuang Street, Guangming District, Shenzhen，Guangdong, China | |
| +86-19926558890 | |
| anne@okaf.net | |
