|
Product Details:
Payment & Shipping Terms:
|
| Lifting Method: | Manual | Humidity: | Less Than 90%（temperature 25°） |
|---|---|---|---|
| Rated Load Capacity: | Lifting Hand Force ≤120N | Accuracy Of Torsion: | ≦ ±3° |
| Lift Speed: | Average Speed 4m/min | Mounting Time: | Single Person≤15min / 2 Persons≤8min |
| High-temperature Working: | 55° | High Temperature Storage: | 70° |
| High Light: | portable telescoping antenna mast,pneumatic telescopic mast,Mobile Telescopic Mast Pole 4m/min |
||
Portable Mobile Telescopic Masts And Telescopic Antenna Telescopic Mast
Manual telescopic mast installation instructions:
1. Vertical use: manual telescopic mast can be installed on the ground, as well as on the vehicle. But no matter where it is installed, make sure it stays perpendicular to the ground. If the manual telescopic mast is tilted, it will affect the effect of the manual telescopic mast rising and descending. If the manual telescopic mast is heavily tilted or tilted for a long time, it will cause damage and danger to the manual telescopic mast.
2. Guy wire fixed: manual telescopic mast needs to be installed in a fixed object, and could not shake, such as walls, car body, foundation piles and so on. The fixed points should be two points at least, one of them in the manual telescopic mast, the distance between the two points is greater than 2/3 height of the manual telescopic mast. The connection should be firm and reliable.
| Environmental adaptability | |
| Items | Test condition |
| Anti-wind capability | Level 8 wind: work normally; level 12 wind: can not be destroyed (working condition, nailed into the ground, 3-4 guy wires, pull angle: 30-40 degrees, the guy wire is tight).GJB74A-1998 3.13.13 |
| Low tempertaure storage | -55° |
| Low tempertaure working | -40° |
| High temperature storage | 70° |
| High-temperature working | 55° |
| Humidity | less than 90%(temperature 25°) |
| Exposed to the rain | Strength 6mm/min, the time of duration is 1 hour |
| Antiseptic | Refer to GJB150.11A-2009 Standard test |
| Dust-proof | Refer to GJB150.12.1986 Standard test |
| Solar radiation | Refer to GJB150.7.1986 Standard test |
| Mould | Refer to GJB150.2.1986 the second chapter standard inspection. Mildew-growing level: level 1 |
| Rated load capacity | Lifting hand force ≤120N |
| Accuracy of torsion | ≦ ±3° |
| Swing | wind speed 18m/s, oscillating quantity: 5%-8% of total height (With full guy wires) |
| Lift speed | Average speed 4m/min |
| Mounting time | Single person≤15min 2 persons≤8min |
| Reliability | Rated load for 30 consecutive movements without damage or permanent deformation |
| Maintainability | Wearing parts easy to disassemble; components can be repaired and maintained by tools; general maintenance and repair time≤30min |
| Security | Self-locking at any height; would not fall at any time |
Contact Person: Miss. Anne
Tel: 86-19926558890
Fax: 86-755-29680362
| Factory Address:3rd Floor, No. 13, Huiye Road, Tangjia Community, Fenghuang Street, Guangming District, Shenzhen，Guangdong, China | |
| Sales office:3rd Floor, No. 13, Huiye Road, Tangjia Community, Fenghuang Street, Guangming District, Shenzhen，Guangdong, China | |
| +86-19926558890 | |
| anne@okaf.net | |
